TEP Commercial Energy Solutions

Fall Promotion

Promotion Dates: 9/4/18 -11/15/18


TEP’s Fall Promotion offers you the opportunity to save even more money on energy efficiency upgrades with increased rebates on select measures through our EasySave and EasySave Plus programs. 

Our Fall Harvest Event also allows customers to submit new applications for projects that previously were ineligible to qualify for these higher promotional rebates or standard rebates under the 2018 program. This promotion applies only to new applications submitted between September 4, 2018 and November 15, 2018

Increased Incentives

EasySave

Increased rebates are being offered for new applications for lighting projects. The following terms and conditions apply:

1.    The rebate cap for incremental project costs is increased from a maximum of 50% to a maximum of 75% for new projects during the promotional period.

2.    Rebates for lighting measures are increased from 6¢ per kWh to 10¢ per kWh during the promotional period.

3.    Signed participation agreements are required within 30 calendar days of approved applications (instead of the usual standard 10-business day requirement). Proposals will be cancelled if signed agreements are not received after 30 days.

4.    Only proposals for new projects that have not begun work are eligible. Proposals for projects that are underway or have been completed are ineligible for this promotion. Proposals that are underway qualify for rebates under our Fall Harvest Event.  

5.    This promotion is offered on a first-come, first-served basis until promotion funds are fully committed. Rebates are subject to the availability of funding.

6.   Project completion forms must be completed and submitted with documentation by November 15, 2018. Reservation extensions are not eligible with this fall promotion.

7.   Standard program terms, policies and procedures apply if not specified here.

To participate in this promotion, complete, sign and submit:

EasySave Fall Promotion Terms and Conditions Form

EasySave Plus

Increased rebates are being offered for new applications for Variable Speed Drives (VSDs) and LED tube projects. VSD incentives are calculated based on the connected motor horse power. The following terms and conditions apply:

1.    The rebate cap for incremental project costs is increased from a maximum of 50% to a maximum of 75% for new applications during the promotional period for the measures listed in the table below. No other measures are eligible for the increased cap.

    • 2’, 3’ and 4’ LED tubes – Rebates are increasing from $4 to $6.50 per tube
    • 8’ LED tubes – Rebates are increasing from $4 to $9.50 per tube
    • VSDs from 1-60HP – Rebates are increasing from $60 to $100 per connected motor HP
    • VSDs from 61-75HP – Rebates are increasing from $50 to $90 per connected motor HP
    • VSDs from 76-100HP – Rebates are increasing from $40 to $75 per connected motor HP
    • VSDs from 101-150HP – Rebates are increasing from $35 to $70 per connected motor HP
    • VSDs from 151-249HP – Rebates are increasing from $30 to $60 per connected motor HP
    • VSDs of 250HP – Rebates are increasing from $24 to $55 per connected motor HP
    • VSDs ≥251HP – Rebates are increasing from $20 to $50 per connected motor HP
  1. The Fall Promotion worksheet is available below, and must be used to receive the increased rebates.
  2. All other documentation required by the EasySave Plus program also must be submitted including a Pre-Notification Application.  Applicants must receive a notice of reserved funding to confirm the availability of funds for their project. 
  3. Funding is reserved only until November 15, 2018, and will not be extended.
  4. Only new applications for projects that have not begun are eligible for increased rebates. Projects that have been completed or are underway qualify for standard rebates.
  5. This promotion is offered on a first-come, first-served basis until promotion funds are fully committed. Rebates are subject to the availability of funding.
  6. Applications that were previously submitted and then subsequently cancelled and resubmitted will qualify for the standard program incentives.   
  7. Projects must be completed and Final Applications along with the required documentation must be submitted by the deadline of November 15, 2018.

To participate in this promotion, complete, sign and submit:

EasySave Plus Fall Promotion Worksheet – Lighting

EasySave Plus Fall Promotion Worksheet – Motors

EasySave Plus Fall Promotion Terms and Conditions Form

Pre-Notification Application

Fall Harvest Promotion

Our Fall Harvest Event gives customers the opportunity to submit a new application for rebates on their projects that were previously ineligible to earn either the increased promotional rebate outlined above or standard rebates.  

EasySave

New EasySave proposals for 2018 lighting projects may be submitted and may qualify for higher rebate levels if:

  • The project has begun or is still underway
  • An application for the project was previously submitted, but was cancelled for any reason

Proposals for projects that have already been completed will not be considered.

EasySave Plus

New EasySave Plus applications for 2018 projects may be submitted and will qualify for the standard (non-promotional) rebates if:

  • The project has begun and is still underway
  • The project began and was completed in 2018
  • The standard worksheet is used

Please review the Terms and Conditions forms for both programs. These forms must be submitted along with the customer’s application documents.

Rebates are subject to the availability of funding and applications for this Fall Promotion will be processed on a first-come, first-served basis.

Questions? Contact us at 866-324-5506 or ces@tep.com


© Copyright 2019 DNV GL Energy Services USA Inc.   |     Login